2576792179@qq.com
15738332000
Toggle Navigation
Provide the latest lighting information
We all know that polyacrylamide is used as a flocculant for water treatment in t···
In the textile printing and dyeing industry, usually use a lot of water, after u···
Application of polyacrylamide in building materials:In the field of building mat···
一. Product introductionHeavy metal capture agent is a chemical agent that strongly chelates with heavy metal ions, because it can interact with Cu2+, Cd2+, Hg2+, Pb2+, Mn2+, Ni2+, Zn2+, Cr3+, etc. in wastewater at room temperature and a wide range of pH conditions. Various heavy metal ions undergo...
一. Product introductionSodium acetate, also known as sodium acetate, is an organic substance with a molecular formula of CH3COONa and a molecular weight of 82.03. Sodium acetate trihydrate is a white crystal with a relative density of 1.45 and a melting point of 58°C. It is weathered in dry air an...
一. Product introductionDefoaming agent, is a kind of additive to eliminate foam. In coating, textile, medicine, fermentation, paper making, water treatment and petrochemical production and application process will produce a lot of foam, and then affect the product quality, production process. Based...
一. Product introductionSludge curing agent, a universal inorganic salt compound, mainly used for the dehydration and drying of various slurries (such as oilfield mud debris, river, lake and pond sludge, domestic municipal sludge, piling slurry, tunnel construction slurry, etc.) And curing treatment...
一. Product introductionIt can effectively remove odorous gases such as hydrogen sulfide and ammonia, and the deodorization rate and fly suppression rate are more than 70%; it significantly reduces the content of COD and ammonia nitrogen in the sewage, enhances the purification speed and ability of...
一. Product introduction According to the principle of decolorization, decolorizing agents can be roughly divided into three categories, flocculating decolorizing agents, oxidizing decolorizing agents and adsorption decolorizing agents. The flocculation and decoloring agent is a quaterna...
一. Product introduction Sodium Carbonate is an inorganic compound with a molecular formula of Na2CO3 and a molecular weight of 105.99. It is also called soda ash, but it is classified as salt, not alkali.二. Product character Sodium carbonate is a white odorless powder or granule at roo...
1. Product introductionBactericidal and algaecide, also known as Zeolite and Benzalkonium Chloride. The chemical name is dodecyl dimethyl benzyl ammonium chloride. It is a cationic surfactant and a non-oxidizing bactericide. It has broad-spectrum and high-efficiency bactericidal and algae-killing ab...
1. Product introductionTrichloroisocyanuric acid has a chemical formula of C3O3N3Cl3 and a molecular weight of 232.41. It is an organic compound, white crystalline powder or granular solid, with a strong chlorine irritating smell.Trichloroisocyanuric acid is a strong oxidant and chlorinating agent....
1. Product introductionSodium hydroxide (Sodium hydroxide), inorganic compound, chemical formula NaOH, also known as caustic soda, caustic soda, solid soda, caustic soda, caustic soda. Sodium hydroxide is highly alkaline and highly corrosive. It can be used as an acid neutralizer, coordinating maski...
一. Product introductionThe formation of bubbles in the flotation slurry mainly depends on various types of aerated stirring devices in the flotation equipment, and the addition of an appropriate amount of frothers to the slurry.Foaming agents are generally surfactants, and their molecular structure...
一. Product introductionDemulsifier is a non-ionic surfactant used for dehydration. It is used to remove the water in crude oil and heavy oil to make the water content meet the requirements; used in oil wells can reduce the viscosity of crude oil and prevent the oil well from being blocked. The smel...
